Heart Cutout Harness Bra and Adjustable Waist Belt Set

This two-piece black faux leather set pairs a structured heart cutout harness bra with a coordinating adjustable waist belt, both finished with black O-ring and D-ring hardware. The defining detail is the single heart-shaped cutout pressed into the left cup panel — a deliberate asymmetric focal point that sets this piece apart from standard strappy bras or solid-panel harness bras.

Heart Cutout Bra Design

The harness bra is constructed from narrow black faux leather straps that form a structured cage across the chest. A center O-ring sits at the sternum where the under-bust straps converge, and shoulder straps run straight up to connect at the back. The heart cutout is punched cleanly into the left cup panel — approximately 4 cm across — creating an open-skin detail without any additional hardware or fastener.

• Asymmetric heart cutout on left cup panel, approx 4 cm wide
• Center-front black O-ring at sternum for structural convergence point
• Narrow 1.2 cm wide faux leather straps throughout bra frame
• Shoulder straps adjustable at back for cup lift and fit customisation
• Under-bust band sits roughly 2 cm below the natural bra line for a cropped silhouette

Waist Belt & Hardware

The matching waist belt is constructed from wider faux leather panels — approximately 3 cm at the main band — with a front O-ring centered at the navel and a D-ring accent on the lower panel. A side-buckle closure with multiple notches allows the belt to fit waist measurements from roughly 60 cm to 85 cm. Note that the belt is a separate piece and does not attach to the harness bra, so alignment is worn independently.

• Main belt band approx 3 cm wide, seated at natural waist or hip
• Front black O-ring centered at navel with lower D-ring accent
• Adjustable buckle closure fits waists 60-85 cm
• Structured lower panel with additional D-ring detail for visual layering

Styling & Occasion

Wear the bra over a sheer or mesh bodysuit for a festival layering look, letting the heart cutout frame show through the underlayer. For boudoir photography, pair both pieces with high-waisted briefs and the waist belt worn low on the hips. The all-black faux leather palette works over a fitted black turtleneck cropped at the ribcage for an after-dark party look. Both pieces can also be worn separately — the waist belt over a structured blazer reads as a fashion accessory rather than intimate wear.

Sizing & Fit

The harness bra fits best on bust measurements 80-105 cm (approx 32-42 in UK sizing); the cage structure provides visual framing but no underwire support, so it is designed to be worn over other lingerie or as a layering piece rather than a standalone bra. The waist belt adjusts to fit 60-85 cm waist circumference. Those with a waist above 85 cm should size up or consider the belt worn at hip level, where circumference is typically 8-12 cm larger.

Material & Care

Both pieces are made from black vegan faux leather bonded to a fabric backing — smooth on the outer face with a matte finish, not glossy patent. Hardware rings and buckles are black-coated metal with a gunmetal tone. Wipe clean with a damp cloth; do not machine wash or submerge, as prolonged water contact can lift the bonded leather surface over time. Store flat or loosely rolled to prevent permanent crease marks on the strap panels.